Every water network has its own operating profile. Service connections, building systems, municipal distribution lines, and industrial pipelines can require different meter technologies and sizes. GUANGZHOU BASIC INTELLIGENCE TECHNOLOGY CO., LTD. (Basic Controls) offers a portfolio of ultrasonic and mechanical water meters designed to help utilities, project contractors, and distributors match measurement solutions to real pipeline conditions.
From compact multi-jet meters to large-diameter Woltmann and ultrasonic models, the range supports projects where measurement reliability, practical installation, and future-ready data access matter. The supplied product images show flanged meter bodies, digital display heads, cable connections, and installation guidance—details that reflect the variety of configurations available across the portfolio.
Choose the measurement approach for the application
Large-diameter ultrasonic water meters measure flow using the difference in the propagation time of ultrasonic signals traveling with and against the water flow. Their dual-channel measurement design provides redundancy: if one channel is obstructed or experiences an abnormality, the meter can continue measuring through the other channel. The product also uses a patented measurement method and intelligent data error-correction technology, according to the supplied product information.
Designed for DN50 to DN300 applications, the ultrasonic series offers a nine-digit LCD and self-diagnostic alarms for conditions such as sensor faults, temperature sensor issues, over-range measurement, and low battery voltage. A built-in lithium battery is specified for more than six years of operation, with the manual describing expected use beyond six years. Optional communication choices include M-BUS, RS485, LoRa, 4G, and NB-IoT, depending on configuration. A photoelectric interface supports local reading with a handheld infrared device, while optional pipeline pressure monitoring can provide additional operating information.
Multi-jet wet-type water meters use multiple water jets to distribute flow across the rotor. This design supports measurement across a range of flow rates, including low-flow conditions, and offers a straightforward, cost-effective mechanical option for clean-water applications. The LXS series covers DN15 to DN65, with threaded connections for smaller sizes and flange connections available for larger sizes. The supplied specifications state Class 2 accuracy, horizontal installation, and a range ratio of Q3/Q1 = 100.
Horizontal Woltmann meters are intended for large-diameter pipelines and higher-flow environments. The LXLG detachable dry-type series covers DN50 to DN300. Its measuring mechanism is separated from the water, and magnetic coupling transfers rotor motion to the counter. The detachable construction allows the measuring unit to be accessed for inspection or maintenance without removing the complete meter from the pipeline, helping simplify service planning.
Vertical Woltmann meters provide another option for larger flow applications where operating conditions vary. The WS series is described as combining features of horizontal Woltmann and vane-type meters, with full-flow detection and a built-in stainless steel filter. Its removable measuring mechanism supports maintenance access. The product manual specifies Class 2 accuracy, a Q3/Q1 ratio of 200, and working pressure options of 1.0 MPa or 1.6 MPa. The listed temperature classes include cold-water options and a hot-water option; confirm the required configuration and installation details when specifying.
Features that support dependable operation
Across the range, buyers can select based on nominal diameter, expected flow, water temperature, pressure, connection style, and the level of data integration required. The ultrasonic meter offers electronic diagnostics and optional remote communication, while the mechanical meters provide established rotor-based measurement with model-specific designs for different flow and pipeline needs. The product manuals list Class 2 accuracy for the mechanical series and provide flow parameters to guide model selection.
Accurate performance also depends on correct system design. The supplied installation instructions recommend selecting a meter whose flow range suits the actual operating conditions, flushing pipelines before installation, matching the meter to the pipe diameter, and following the marked flow direction. For the mechanical series, guidance calls for upstream and downstream straight pipe sections and a filter upstream. The ultrasonic manual also stresses keeping the pipe full, avoiding unsuitable locations near elbows or pumps, and allowing appropriate straight runs. Project teams should follow the specific manual for the chosen meter and consult local requirements.
The product images include a flanged ultrasonic meter with a digital head and an installation diagram illustrating orientation and flow direction. These visual references can help buyers and installers discuss space, connections, display access, and installation planning before procurement.
Applications across utility and building infrastructure
Basic Controls’ water meter portfolio is suitable for consideration in municipal water distribution, commercial buildings, residential supply, industrial water systems, and other clean-water networks. Multi-jet meters can serve smaller service lines, while Woltmann and large-diameter ultrasonic models address larger pipelines and higher flow requirements. Electronic communication options can support projects moving toward remote meter reading and centralized data management, subject to the selected meter configuration and system design.
For overseas distributors, carrying multiple meter technologies can make it easier to respond to varied project specifications instead of relying on a single product type. Comparing expected flow against Q1, Q2, and Q3, checking temperature and pressure conditions, and confirming connection standards are practical steps toward recommending a suitable model. Buyers should also verify local metrological, installation, and approval requirements before placing an order.
Engineering experience for long-term cooperation
Founded in 1998, Guangzhou Basic Intelligence Technology Co., Ltd. has more than 26 years of experience in smart utility solutions. The company reports more than 80 patents and software copyrights and has participated in drafting national and international metrological standards. Its capabilities extend beyond water meters to smart water and gas solutions, heat meters, flow meters, communication modules, and integrated management systems.
The company’s stated credentials include EU MID certification and recognition as a Guangdong Provincial Famous Brand Product, as well as the Guangdong Provincial Engineering Technology Research Center for Cooling and Heat Measurement Energy Conservation. These are company-level credentials; buyers should confirm the certifications and approvals applicable to a particular product and destination market.
Discuss your project requirements
Whether you are sourcing meters for a municipal tender, building project, industrial installation, or distribution portfolio, Basic Controls can help you compare available technologies and configurations. Share your pipeline diameter, operating flow range, water temperature, pressure, connection requirements, and preferred communication method to begin a model discussion.
Contact: SARA HUANG | Phone: 18011862120 | Email: SARA.HUANG@BASIC.COM.CN | WhatsApp: 18011862120 | Website: www.basic-meter.com
Headquarters: Room 611, NO.101 Kexue Avenue, Huangpu District, Guangzhou, P.R.C | Fax: 020-80672831



More Stories
Industrial Inductive Proximity Sensors for Metal Detection
2026 Top 7 European Aftermarket Fuel Pump Assembly Picks
Medical Oxygen Generation System Selection: A Life-Cycle Cost Guide for Hospitals and Plateau Projects